Princes Aurora’s Pink and Blue Gown – The Construction: Splish Splash

Click here for Sleeping Beauty's Pink and Blue Splashed Dress - Part 1
Click here for Sleeping Beauty's Pink and Blue Splashed Dress - Part 2

Okay, you know how I said I only had a week to make a full ball gown? Well, that was a total lie. I only had a week to make three ball gowns! Here, let me explain.

To make the two toned splash effect for this dress I had to make a base dress (half blue and half pink) plus the outer dress that would be in the opposite colors. Because I demanded quality out of this garment ***no shortcuts allowed even on a time crunch!*** I had to make a backing for the outer dress so when I turned it into splashes it wouldn’t fray along they edges. This brings the total to three.

I could probably try and get technical and say that I made the gown a fourth time to line it, but since I’d have done that regardless of the outer design I’ll just stick with three.

And my friends say I’m lazy… pfft.

Even though I didn’t start this dress until a week before the event, I knew I wanted to make the Sleeping Beauty dress ever since the New Years theme was announced back in September. Because of this I’d been keeping my eye out for fabrics over the previous few months. I thought I had struck pay dirt on one of my trips to Kansas where I found a gorgeous micro suede fabric in both pink and blue. Thinking it would make for an amazing bodice, I scoured the store for other fabrics that would compliment those tones and loaded up my cart. However, when lady at the cutting counter began unrolling the 8 yards of pink I’d need, we discovered that the bolt was actually just a collection of remnants… and they weren’t even from the same dye lot! Ugh! I was heartbroken. I knew the dress needed complimentary fabrics and tones or it would clash, and a patchwork of 5 different colored pinks just wouldn't do. Reluctantly I put everything back and went home empty handed.

*** Have ya’ll begun to notice a trend? I always seem to have trouble finding fabrics! Even though I know exactly what I want the stores never seem to carry it. I wonder if this is common problem for other people too. Hmm….***

Any who, I kept looking for fabrics for the next few weeks with no luck. It was getting closer and closer to go time, so I needed to find something soon. Before sucking it up and calling the company to rush order entire bolts, I decided to drive the hour south to Moore to take a chance on their fabric stores. As luck would have it they had almost the same exact fabric I wanted in the first place. Yay!

There was one little problem though. In the entire store there were no lighter pink and blue fabrics in the same tone. ***insert eye twitch here*** Okay, fine. The fabric gods have obviously deemed that I was not allowed to have a micro suede bodice for this gown. But I wasn’t going to let them have the last laugh. The back side of the micro suede fabrics were beautiful shades of pink in blue in just a few steps deeper than the front. I’d simply flip my original plan! Now the sleeves and flouncy overskirt would be made with the micro suede, and for the bodice and main skirt I’d just flip the fabric over.

See, I can be flexible. ***Sticks tongue out at the fabric gods***

So, now that I had my fabric purchased (all 24 yards of it @_@), I finally got started on the splash panels.

I’m not exactly sure if I can articulate how the splash panels were made. A vague overview would be that  I started with two layers of each panel, one the outer fabric and one a thinner lining fabric. After drawing some freehand splashes, I ran over the drawn lines with a straight stitch on my machine, flipped the fabric right side out, and then ironed it flat.

Hopefully that made sense. Perhaps one day I can make a video for the technique.

Once I finished each of the splash panels they were pinned onto their bases where they awaited their impending applique stitch!

Soooooo many needles. And this bodice was only 14 inches tallish? Just wait til you see the skirt!

Do you see my cute little cheat sheet up there? I was so of proud of it. In order to prevent myself from messing up, I wrote a list of every pattern piece, right side or wrong side, that I needed to cut out and in which color. It seems kind of OCD, but it was actually a huge helper. It’s super easy to cut out the wrong color or pattern side when you’re making a dress that is half one color and half another!

To be continued...

~~~

Do you have any tips for keeping your sewing projects organized? Even with my many lists I still sometimes find myself making tiny mistakes!

Click here for Sleeping Beauty's Pink and Blue Splashed Dress - Part 4
Click here for Sleeping Beauty's Pink and Blue Splashed Dress - Part 5
Click here for Sleeping Beauty's Pink and Blue Splashed Dress - Part 6

Princess Aurora’s Pink and Blue Gown - The Plan

Click here for Princess Aurora's Pink and Blue Gown - Part 1

Like most of my projects lately, I found myself on a crazy tight time schedule when making the Sleeping Beauty dress. I swear I’m not a procrastinator! Well… that’s a lie, I’m a horrible procrastinator. Even so, I’m also suuuuuuper busy all the time. From early Nov. straight through mid Jan. I spent almost every day in front of the sewing machine for at least 8 hours. Throw in the two trips to Kansas City, two family holidays, a craft show, and four finals all in this same time period I’m surprised I got anything done at all! With everything on my plate I only had the week between Christmas and New Years to get this dress ready for the party. A full ball gown in a week?… Pfft, no problem. School was out, I could totally do this /flexes.

In typical me fashion, I started by obsessing over the design concept. I know that I technically had a print out of the exact gown I wanted to make from the movie still, but there were things that I still needed to work out. Like how I wanted to go about making the overskirt, collar, and splashed designs.

For full disclosures sake, I should probably let you know that I started with Butterick Pattern 4453 as a base. It was a pattern I found in my stash, but it’s discontinued now.


It had the right basic shape and feel for the dress I wanted, but I had to alter it a ton to get the desired finished pattern. I think the only pieces I didn’t alter, tweak, or completely change were the two side panels of the skirt. Even then I should have added pockets! ***Why oh why do I always forget to add pockets ***

So, I started scouring the internet for ideas… Do you know how many really ugly adult Princess Aurora dresses there are out there? It’s really quite astounding.

I suppose that’s unfair. A lot of the cosplay dresses people created were really cute, but the official Disney Land/Disney World dresses were so obnoxious and weird. The ‘collar’ of the dress wasn’t even sitting on the shoulders where it was supposed to be.


See? Weird. It vaguely looks the same, but at the same time is totally unflattering and odd. And to top it off this was one of the only official blue dresses I could even find to compare directly with the original; almost all of them are Pink! I couldn't find a single one that resembled the splashed dress I was planning on making.

/sigh. I decided instead of looking at reference pictures from what other people had made, I’d simply wing it. Worst case scenario, I’d totally botch the whole dress and just wear mickey mouse ears to the party. No one would ever have to know.

I set about making my under corset and mockup of the bodice, which took about two days. I almost skipped making a mockup due to the time crunch, but I’m soooo glad I didn’t. With the under corset on, the original pattern had to be taken in and altered all over the place. Because of the way I planed to make the splashes there would have been practically no way to do this post construction, so my extra few hours of work saved me a lot of grief. I’m almost positive there would have been tears if I’d made the gown straight from the original pattern. Lesson of the day: Always make a mock-up!

With the fitting completed it was time to start sewing the actual dress…

Click here for Princess Aurora's Pink and Blue Gown - Part 3
Click here for Princess Aurora's Pink and Blue Gown - Part 4
Click here for Princess Aurora's Pink and Blue Gown - Part 5
Click here for Princess Aurora's Pink and Blue Gown - Part 6

~~~

What do you think of the Disney World dresses? Am I just crazy, or do you think they look slightly weird too?

A Disney New Years

I’m baaaaaaaack.

The trip to Breckenridge was absolutely amazing and so much fun. There was skiing, snowmobiling, pottery making, and even a wedding! However, now that I’m back I’m realizing just how far behind I am in mundane responsibilities, like school *mutters*. Because of this, it will likely be a few days before I dive into a new project.

There is good news though. You see, this leaves me more than enough time to make posts for one of my favorite costumes of all time, my Sleeping Beauty dress!

Every year my best friends throw an amazing New Years party and each time there is a new theme. Once it was 80s, another it was fancy cocktail attire, but this year it was going to be Disney! How much fun is that? Even though I had a million ideas rolling around in my head, from the carpet in Aladdin to the feather duster in Beauty and the Beast, there was never any doubt in my mind as to what my costume would be: Princess Aurora. *** The one character where naps are perfectly acceptable as role playing! ***

One of my moms favorite Disney movies of all time has got to be Sleeping Beauty. *** I remember it being played in our house A LOT growing up.*** As a kid, she even made me a blue sleeping beauty dress for Halloween one year. However, as I researched the gown for this party I started to notice a disturbing trend when it comes to Aurora’s attire. When exactly did she become a pink princess?!?!?

As most of you know, in the movie there is a great faerie fight between Flora and Merryweather over whether the dress should be pink or blue. They bicker and change the dress back and forth with magic over and over, making it one of the most memorable parts of the story. However, having seen the film about 100 bazillion times I clearly remember her birthday dress being blue for about 95% of the movie. Despite this, you can’t find the blue dress anywhere nowadays! From books to cartoons, to even costume stores and DisneyLand it is now a strictly pink dress. It’s as if the blue gown never existed!

There are many debates and explanations online as to why Disney has decided to shun Aurora’s blue dress; it usually comes down to their need to distinguish her from Cinderella, as they both have blonde hair. Let me tell you though, it is an absolute outrage in my eyes. So, I decided that when making my New Years costume I would not bow to Disney’s pink princess ploy. She was not pink darnit! But….. I also determined that I wouldn’t make a strictly blue dress either, since she wasn't only blue.

Instead I would make, by far, the best dress in the whole movie. The one that immediately sprang to mind every time I thought of Sleeping Beauty.

The pink and blue splashed dress from the cabin scene!

Yes, I know. Aurora never technically wore this dress. But who cares! It was one of the best scenes in the whole movie and definitely memorable. Plus, it reminds us that Sleeping Beauty was not strictly pink nor blue. She was both.

Take that Disney!

Click here for Sleeping Beauty's Pink and Blue Splashed Dress - Part 2
Click here for Sleeping Beauty's Pink and Blue Splashed Dress - Part 3
Click here for Sleeping Beauty's Pink and Blue Splashed Dress - Part 4
Click here for Sleeping Beauty's Pink and Blue Splashed Dress - Part 5
Click here for Sleeping Beauty's Pink and Blue Splashed Dress - Part 6

~~~~~

Do you have a favorite color gown? It’s alright if it’s pink, I promise I won’t bite your head off ^_~.

Going on Vacation!

I'm leaving for my vacation in Colorado tomorrow, so there won't be any new posts for a couple of days. Don't panic; I'll be back with lots more of my sewing and craft adventures soon enough.

Weeeeeee vacation!

White Mage Hoodie in Miniature–Part 3: Done!

Click here for WHM Hoodie in Miniature - Part 1
Click here for WHM Hoodie in Miniature - Part 2

Squeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee!

It’s all finished. I’ll admit I was pretty much a slacker today and spent more time researching stuff for wedding invitations rather than working on the hoodie. But I finally got off my lazy bum around 5, and now it’s done!


You’ll notice that the zipper is now white. Apparently coat zippers only come in certain shades of red, and WHM red just isn’t one of them. I’m sure I could have special ordered one if I’d thought to check earlier… but meh. I think it looks pretty good with the white one anyway.

And the back!


Yay for fixing those accent patterns! It would have had a really weird shaped plateau thing in the middle if I hadn’t caught that in time.

I must say, this hoodie turned out a lot larger than I thought it would. I’d read that Burda’s kid patterns ran big so I made the 9 mo. sized one instead of 12 mo., but even then it looks to be big enough to fit a two year old. Granted I don’t have kids, nor do I spend much time around them, so I may be way off in my guestimations. I suppose even if it’s too big he’ll grow into it eventually. I just hope it’s not the middle of summer when he finally does @_@.

Since I didn’t have a spare kid around to model this cute little jacket I decided to dig in my closet for one of my childhood stuffed animals. Theodore Edward Bear *** Ted E. Bear for short *** was the perfect size for the job and wore it beautifully.

I kind of like the irony of giving a child a, practically, all white hoodie. It's going to get dirty soooo fast ^_^

Any who, now that this is all done I’m not quite sure what I’ll start on next. I only have a few days before leaving for Breckenridge, so I don’t think I’ll get into anything too ambitious. Perhaps I’ll start playing around with invitation ideas and testing out the pomanders. Considering the wedding is only 4 months away, I really should stop being a slacker about this.

Pattern Used: Burda 9828.
   

White Mage Hoodie in Miniature–Part 2

Click here for WHM Hoodie in Miniature - Part 1

Gah! I didn’t get quite finished today. I came really close, but a few hours ago I realized the zipper I’d purchased was the wrong color. ***Who knew red could clash with red?*** Since I have to wait til tomorrow to go grab a new zipper I figured there was no rush to get the lining put in tonight. Pending no serious disasters I should be done tomorrow though.

I did get a lot accomplished for the day. This morning I transferred all the pattern pieces to butcher paper so I could save the pattern, in tact, for future use. Then I drafted the red triangle borders that would line the edges of the hoodie. There was a tiny bit of a hiccup here. I made a stupid mistake and had to go back to redraft the back accents.

Do you see it? The writings a bit small, but it’s there on the right.

I got a bit seam allowance happy and added the extra distance to my center back piece even though it was supposed to be cut out on a fold. Ugh! That would not make for a very pretty ‘triangle’ right in the middle of the hoodie. As soon as I finished cutting out my first red piece I realized my mistake. I felt sooooo dumb. It just goes to show that no matter how meticulous you are, it’s always possible to make tiny mistakes. Luckily these pieces are so small that not very much fabric was wasted by my mess up.

Other than that the day went by without a hitch. It basically just turned into a big assembly line of applique before quickly stitching the pieces together.

The only difficult part of this was matching up the pockets to the front hoodie panels. Because the pockets sit so low on the jacket, the red accents invade their territory. I had to draft some extra triangles to make them all line up and then baste stitch everything to make sure nothing went askew. If I make the hoodie again in future I’m thinking about just leaving the pockets off all together. I mean, they’re cute and all, but what use does a 9 month old really have for pockets in their coat?

On a slightly unrelated side note, I really need to learn to use my fancy new embroidery machine. I really want clothing tags to sew inside my garments that have my companies name on them. I know people don’t normally see them, but they seem a bit more professional to me. Like it finishes off a piece. Plus it tends to show a bit more pride in the item. Since I don’t really have the time to spend fiddling with my new toy yet, I just used my regular machines alphabet function to stitch out my company name on some twill tape. It’s not as professional as a single embroidered tag, but it turned out kinda quirky cute.

I stitched out his name too and added it into the front of the lining. I’m not sure of the whole ‘kids name inside their clothing’ protocol, but I thought it’d add a nice personal touch.

Whelp, it’s getting rather late, so I think I’m going to head off to sleep. That way I can wake up bright and early tomorrow and finish this awesome little hoodie!

Click here for WHM Hoodie in Miniature - Part 3: Done!

White Mage Hoodie in Miniature!

Ooooooh, what’s this you see? It’s the beginnings of a Baby WHM hoodie, that’s what!

I have been squeeing non stop about this project since I came up with it about three weeks ago. Despite my impatience to get started, I decided to be responsible and finish the diaper bag and do some school work before tearing into the fabric that was burning a hole in my craft table. *** I’m as shocked as you are by my self control, believe me ***

Hmm, I suppose I should take a step back and give you some back story so you can truly grasp how awesome this will be.

You see, I am a bit of a geek. I didn’t meet my significant other in a ‘normal’ fashion. Nor was this an eHarmony or Match.com deal. I met him through an MMO. ***For those non gamer geeks out there that’s a Massively Multiplayer Online Game***. Final Fantasy XI to be specific. More accurately I met him at a linkshell vacation in Breckenridge, CO , but that’s a tale for another day.

The real point is that we weren’t the only love connection to sprout out of our online groups gaming hobby. The linkshell leader, and one of my guys best friends, also found himself a gal through FFXI. ***from my hometown actually*** She moved out to the east coast with him about two years ago and a few months back gave birth to a little boy.

Despite the fact that none of us really play FFXI anymore, we have still kept in touch and a bunch of us are getting together next week for another group trip to Breckenridge. Since the linkshell leader was the one coordinated this amazing trip, I thought it would be awesome to make their little guy a Final Fantasy White Mage hoodie as a thank you gift. I mean, just one gamer parent would think a WHM hoodie was awesome all by itself, but this kid has two gamer parents!

If I know them as well as I think, their kid will end up practically living in this hoodie until he grows out of it or completely destroys it. Whichever comes first. Even then they may ask me to make another one.

So, that’s how this project got added into the mix. I think it's going to turn out absolutely adorable and can't wait to see it finished!

Now I just need to get started so I can have it done before we leave for Colorado. Eep!



Have you made any neat costumes for little ones? I must admit, I’m a huge sucker for children in cosplay. They’re so freakin’ cute!

Click here for WHM Hoodie in Miniature - Part 2
Click here for WHM Hoodie in Miniature - Part 3: Done!